Protective film manufacturers market size analysis

/0 Comments/in /by

　　In 2012, worldwide sales of various protective membranes reached about $5 billion 800 million. It reached $6 billion 800 million in 2016, a compound annual growth rate of about 4.1%. At present, China’s market is still in a period of rapid growth, the rapid development of China’s electronic and electrical industry will provide a strong driving force for the protection of the membrane market. The entire plastic film market, the current annual sales revenue of more than two hundred billion. In polyester film, for example, output increased nearly five times from 2007 to 2016. Polyester film has excellent performance, high end fields such as electronic membrane, optical film and photovoltaic film, etc. the products have high added value and strong profitability.

　　Industry demand growth to teach stability, according to PCI predicts that by 2017, the global demand for PET film will be an average annual growth rate of 6.8%. It is expected to reach 4 million 400 thousand tons by 2017. As the world’s fastest growing market, China’s PET film demand increased from 07 tons in 550 thousand years to 1 million 700 thousand tons in 2014, nearly three years, the growth rate of more than 15%.

　　Overall, in recent years the domestic protection film manufacturers although affected by the global economic crisis, but the market demand is still a steady growth, expanding domestic demand and national investment, economic growth and industrial policy stimulus, related fields such as microelectronics, decorative building materials, metal, automotive, agricultural, mobile phone film and other new technologies, the expansion of the application of market segmentation, driven by strong growth in demand of protective film.

　　With the development of industrial technology and the improvement of consumers’ demands, different kinds of products have more and more high demands for the performance of protective films, such as high barrier, heat resistance and high transmittance.

　　At the same time, with the large screen consumer electronics products is closely related with the daily life of the field of protective film, its security has become an important consideration of user requirements, all sectors of the users of the protection film substrate selection, and composite coating process is put forward in the strict standards. At the same time, the protection film industry is also saving resources, energy conservation, environmental protection, recyclable, easy to be degraded environment and other environmental protection direction. Therefore, the development trend of products with high added value has been formed.

What are the biggest concerns about the use of protective membranes?

/0 Comments/in , /by

　　Residue problem of protective film does not know how many manufacturers use a headache how many times, each time leaving residue, resulting in an extremely bad influence on the products, to solve the problem of residue PE protective film, the key is to choose the protective film varieties, so the selection of protective film protective film, multi scale complete, stable supply manufacturers, is very necessary.

　　A general problem of main reason degumming PE protective film product is when a user profile to be installed after the completion of the construction must take the PE protective film torn from the surface to the profile, but also continue to carry out a viscose protective film performance and not with the protective film, but residues in a section on the product.

　　This is the last thing a user would like to see. A pressure rubber product is probably the protective film used generally is not in conformity with the provisions, but also is more viscous, this will lead to protection film product is stripped, when the tension is greater than a situation in the resistance, and the residue in the section on.

　　The general causes of PE protective film no way effectively stripped there are generally two kinds of possibilities, one is the PE protection film products for sensitive adhesive and protective film is not a special sensitive glue, however the protective film in the paste when the effect is very good, but in general the comparison will peel difficult, protective film which is also some illegal protection film products manufacturers produced a most frequently a problem.

　　There is a possibility that the PE protective film with a parent material is used, of course, is not a force to bear upon peeling fracture phenomenon, thus appear when peeled, generally this is a problem that the user is a headache.

What is the white spot on the protective film?

/0 Comments/in , /by

So how to reduce the impact of the protective film white spot on the product, you can pay attention to the following points:

1, different batches of ink to increase particle size detection indicators, strictly controlled, especially the full end ink varieties, particle size and particle size distribution outside the standard range is not adopted; select good and stable suppliers. The protective film is based on the bottom mold overlying a layer of oily glue, the protective film industry belongs to the high-end product protection film, which mainly used for advanced batteries, lens panel products packaging, especially some with water and air, sunshine insulation products, electronic protection they become the preferred packaging film. White spots appear on the phenomenon and a lot of protective film, some reasons on the production process, there is cause after production is not properly maintained, in white spots, causing great losses to the product itself, so how to eliminate these spots, the producers and manufacturers are required to have the knowledge to say. So how to reduce the effect of flaking on protective film products? Can pay attention to the following points: 1, different batches of ink particle size increase detection index, strict control, especially the full bottom ink varieties of particle size and particle size distribution in the standard outside the scope of the;

2. Use special adhesive for electronic protective film. The surface adhesive force of the special adhesive for electronic protective film is lower, and the spreading effect on the surface of the adhesive layer is better than that of the general adhesive. Using glue glue will be very easy to control the flow of liquid, there is a better coating state. From the adhesive coating state, the use of electronic glue can eliminate the possibility of white spots.

3, the viscosity of the gum and the number of roller lines have a certain matching relationship, beyond the matching interval too much damage to the coating state of glue, resulting in “white spots” of the cause of concern. 4. Adopt electronic protective coating. The coating process is commonly used in printing film (ink surface) coating, here is the special coating method, to avoid the penetration of ethyl ester on the ink layer of the uneven problem, avoid the penetration of ethyl ester on the ink layer of the uneven problem, at the same time, the adhesive coating can fully cover the surface of the adhesive layer that can be eliminated white spots. But this process has its significant limitations, first of all, only the VMPET composite, and other electronic protective film heated in the oven in effect under the action of the tension will be tensile deformation; secondly, the peeling strength of the sacrifice.

5, soft packaging enterprises must adhere to the coating roller regular cleaning system, master the correct coating roller cleaning method. In the production of full white or light background printing film, pay attention to two points, first of all, before production, scraper, coating roll, flattening roll and so thoroughly cleaned.

6, should be done thoroughly drying adhesive. Because the barrier aluminum is better, such as in the composite film adhesive is not completely dry, then the composite membrane in curing room, a large number of solvent residues to quickly release in the electronic protective film barrier, will form a bubble. There will even be no white spots when the machine is down, and the white spots appear after ripening.

Storage, use and maintenance of PET protective film

/0 Comments/in /by

1, tape should be stored in the warehouse, to avoid the sun and rain; prohibited contact with acid base oil, organic solvents, keep clean and dry, from the discovery device 1m, room temperature between -15 and ~40 degrees.

2, tape should be placed in rolls, do not fold, storage time is too long, should be changed every season. Anti static warning floor adhesive tape PET protective film

3, loading and unloading conveyor belt, the best use of cranes, and with a beam of the rigging, lifting smoothly, to avoid damage to the belt side, do not rough handling, causing loose roll rejection.

4, tape type, specifications should be based on the needs of use and specific conditions, reasonable selection.

5, shall not be different varieties, different specifications, models, strength, cloth layers of adhesive tape connected (with groups) used together.

6, the conveyor belt joint is best to use hot vulcanization adhesive, in order to improve reliability, to maintain a higher effective strength.

7. The diameter of the transmission roller of the conveyor and the minimum belt diameter of the conveyor belt shall comply with the relevant provisions.

8, do not allow the tape or crawl to keep hunting, drag roller, roller flexibility, tension force should be moderate.

9, conveyor equipped with baffles and loading device, should avoid the tape wear.

10, cleanliness is the basic condition for the good operation of adhesive tape. Foreign material will affect the eccentricity of belt, tension difference and even fracture.

11, the use of adhesive tape found early damage phenomenon, should promptly find the cause, repair, to avoid the emergence of adverse consequences.

Performance requirements for self-adhesive protective films

/0 Comments/in /by

As the name suggests, self-adhesive protective film is a kind of film used to protect the surface. The purpose of the utility model is to prevent damage or contamination of the surface of the base material during transportation, assembly, or processing. The self-adhesive protective film is attached to the surface of the protected substrate until the product is delivered to the user. As a result, the basic performance requirements are as follows:

proper and steady viscosity

Tear off easily

Tear off the protective film without residue and not.

after a long time, no bubbles, floating or curling

outdoor use with weather resistance

Features and applications of single layer PET protective film

/0 Comments/in , , /by

Single PET protective film is a polyester film (PET) as the substrate, with polyethylene glycol terephthalate as raw material by extrusion method into thick slices, and then by biaxial stretching film material made of single coated silicon glue; composed of single-layer PET protective film.

Features of single layer PET protective film:

1, this product for metal, plastic, glass and other stickers have a good bonding strength, and good retention;

2, viscous and thickness of a wide variety of protective film surface smooth and smooth;

3, heat resistance, weather resistance, acid resistance is good;

4, suitable for round knife cutting, flat knife cutting die pad and row waste;

5, can also be used as Gao Jie net optical material auxiliary die cutting;

6, surface resistance 107-109 cm, environmental protection non-toxic tasteless;

7, the product surface without static material migration phenomenon;

8, 1000 level clean environment processing, cleanliness is extremely excellent;

9, transparency is good, can be in the protective material under the condition of the appearance of optical film inspection;

10, low viscosity, pasted on by small changes;

11 、 products have single-sided anti-static and double-sided anti-static stripping voltage.

12 、 antistatic effect is good, performance is durable and stable.

Uses: widely used in various materials after cutting waste. Precision materials die cutting industry, medical, health, packaging and other industries.

PET silicone protective film, why are bubbles open and warped phenomenon?

/0 Comments/in , , , /by

PET protective film is a kind of material with smooth surface and good electric insulation. It doesn’t adhere to other material. Most of the market saw is a protective film adhesive, so the viscosity can often is the use of PET protective film of silicone glue, it is paste glue with high viscosity (KL-2634ABC), medium viscosity (KL-2620ABC), low viscosity (KL-2620ABC) of three kinds of silicone glue, are high temperature adhesive. The viscosity here is also known as the peel rate, and G can be used to indicate his viscosity.

Low viscosity refers to the peeling rate of 1-3g, medium viscosity refers to the peeling rate of 3-5g, high viscosity refers to the peeling rate of 10-100G, and the adhesive has a good flow support before curing. After curing, the exhaust and transparency are also very high. So it is widely used in computer monitors, protective screen, and mobile phone protection towels and other PET silicone protective film.

The question of bubbles is not related to the rate of peeling off. Usually in production operations, some places do not notice, for example:

The ratio of solvent to dilute 1. please A:B:C: solvent =100:100:10:400, solvent can be used here water containing low toluene or ethyl acetate to mix better, this is more conducive to dilute the PET protective film of the silicone glue paste (to prevent brushing due to the uneven mixing and foaming), according to the order to add glue the first B (delay agent) and C (tackifier) mixed evenly, and then adding A material (catalyst) mixing time is 20 minutes.

2. knife roller coating method by scraping or evenly brush on the PET film, PET film clean, prior to use alcohol liquid to clean the PET film, to ensure that no stains protective film, and spraying when touching it, please bring clean gloves to prevent hand perspiration or dirt contact the PET film, resulting in uneven brushing, foaming phenomenon.

3. into the oven or tunnel oven curing, the curing is best to use a gradual approach, the oven temperature is set to 90 C to 160 C to 100 C, barbecue time according to the amount of coating to adjust, when the dry gel thickness in 10 m coating, glue the barbecue time control in 1 minutes. Dry glue thickness in 20 m coating, glue baking time should be controlled within 1 minutes, pay special attention to the baking time should not be too long or too short, the accuracy of baking time is a protective film two warped decision, or bubble reason

What are the main uses of protective film?

/0 Comments/in , , /by

Now the protective film material is some very good material, so for these protective film is also very convenient. The screen protective film now have their own a big sky, for which you have to learn some very little understanding of their own and some great understanding of it, now a protective film for these methods only stay in order to learn more things. What are the uses of protective membranes, respectively? You have to know about this. Now, there are many people who don’t know much about the protective membrane, so these are the things you have to do. There are some things you need to know about the protective membrane, such as how to analyze some of the material that protects the film, which you also need to know and understand.

There are two kinds of protective films: one is oil free adhesive paper; the other is water glue with off base paper. The above two are composed of three parts: from the paper, glue coated on silicon (rubber oil or water glue), PVC plastic film. Film type oil glue composite, due to different purposes is generally not known protective film (also for protection), mainly used for advertising, such as a computer, its oil glue function is carving characters and patterns is not easy deformation, suitable for long-term paste is not easy to fall off, alice. Such products, such as instant stickers, furniture stickers, stickers and so on. Protective film is a composite protective film of water and glue. It is mainly used for engraving art, glass and surface protection of other things. Water gel, that is, Armin glue series, this gum non-toxic, harmless to the human body, is in line with state regulations green environmental protection glue.

Introduction to protective film applications:

The protective film according to the scope of application, can be used in the following areas: the surface of metal products, metal products, plastic products surface coating surface, automotive products surface, the surface of the electronic product, product surface, the surface profile of the product label, and other products surface.

The biggest advantage of protective film:

The protected products are free from pollution, corrosion and scratches during the process of production, processing, transportation, storage and use, and protect the original bright and clean surface so as to improve the quality of the products and the market competitiveness.

How to buy protective films need to pay attention to what?

/0 Comments/in , , , /by

Shopping is the main course of the quality, price and customer service service three, there is no exception in the film industry, quality is the key, which requires the buyer must have an understanding of their own use of the products, so as to be an antidote against the disease. Secondly, the price, protective film is mainly used in product packaging, cost savings is to see how to spend the least amount of money to buy the best goods. Finally, customer service service, the use of protective film is quite a long time, manufacturers generally use a month’s order is not a few, so the protective film supplier customer service service is an important factor for buyers to consider.

To prevent some dealers from their own interests, recommend some counterfeit and shoddy goods to consumers.

How to choose when you buy?

In the purchase of protective membrane products, should pay attention to the following

1., we should select high protection, stable quality, good after-sales service of protective film products.

2. check the purchase of the product packaging logo, logo is complete (executive standard, grade, manufacturer name, address, date of production including product packaging) is solid, specification and product compliance, beware of exaggerated and the phenomenon is inconsistent with the facts.

3. to observe the appearance of the protective film quality, including color, transparency, viscosity, and whether there are crystal dots and holes in the protective film.

4. check the protective film function is reliable, flexible and should choose more than two products were examined, in the test, two or more products to choose the corresponding comparison test, to find a meeting point with their own products.

5. after the test, it is necessary to estimate the service life of the protective film. If it is a temporary protective film, see whether the protective film is left with residual glue after it is torn off.